HOW TO APPLY A VINYL DECAL STICKER

Step 1: Make sure your window is clean. Simply wipe off the window with a dry towel or cloth.

Step 2: Decide on where you would like to place your sticker.

Step 3: Slowly remove the sticker from the paper backing, making sure that the sticker stays attached to the transfer tape.

Step 4: Position the sticker on to the desired surface. Once, the decal sticks you will not be able to reposition the sticker without destoying it.

Step 5: Use a hard edge object like a credit card or library card to the entire surface of the decal.

Step 6: For best results start in center and rub toward one direction, return to the center and rub in the other direction. Be careful to make sure the sticker is fully adhered to the surface, and remove any air bubbles.

Step 7: Once, all the decal is firmly attached, slowly remove the transfer tape. It's easier to remove the transfer tape by pulling it in a downward angular fashion. Make sure that the entire decal is removed from the transfer tape, and remains of the surface.

Step 8: he sticker is now fully applied. Check the sticker for any air bubbles. The bubbles can be removed by working them to the edge of the sticker. If it's too difficult to move the air bubble try making a small pin hole in the bubble. This will allow the air to leave, and you won't see the pin hole once the air has leave. That's it! Your sticker should last you for many year to come. It will survive nicely through rain, sleet, snow and gentle washings. You can remove the sticker from glass surfaces with a razor blade.

HOW TO APPLY A VINYL DECAL STICKER VIDEO